How To Connect Two Laptops Using LAN Cable In Windows 11 [Step by Step]

Are you Searching For How To Connect Two Laptops Using LAN Cable then don’t Worry? Here We Will Share with you step by step Guide. We love that I can access the internet from any room, but sometimes it’s important to be able to transfer files between two computers using an Ethernet cable.

This is especially true if you are trying to fix your laptop and need some help or want to play multiplayer games with another person on their computer. The process of connecting two laptops together via LAN Cable is not hard, but this guide will walk you through everything step by step so that there are no mistakes! Read more below about how easy it is!

If you have a router/modem connect the first laptop via Wi-Fi and continue with this guide for the second laptop, We will be using a wire to connect our computers, but it is possible to use a wireless connection if you have access to one. In order to do that, follow DIY PC Guy’s tutorial on How To DIY Connect Two Laptops Wirelessly Using Wi-Fi.

While both of your laptops are plugged in, look for an empty spot where you can plug a LAN cable into each of them. This might take several tries as the cables only go one way – make sure they face correctly! If you see any empty spots between your computers, any items you have plugged in, or are not sure how to know which way they go – follow our guide on How To Tell Which Way To Plug In A Cable.


How To Connect Two Laptops Using LAN Cable In Windows 11

How To Connect Two Laptops Using LAN Cable windows 11

I am using windows 11 on one of my laptops and I want to connect another laptop to it using a LAN cable what should I do?

Simple steps for this are given below.

Step1: Connect your device that is already working on the network to your computer via Ethernet cable.

Note: Ethernet Cable must be long enough to reach the router.

Step2: Open Network and Sharing Center by clicking its icon on the taskbar notification area.

Step3: Under “View connection Properties” click the name of your active connection which is most likely Local Area Connection  (unless you have multiple connections). This will open a new window with 4 tabs General, Data  Transmission  Priority, and Advanced towards the bottom.

Now you should be seeing something like this :

Step4: On the “General” tab, click Configure button.

Step5: You will see a new window “Local Area Connection Properties”. Now select “Internet Protocol version 4 (TCP/IPv4) ” and then click the Properties button. On the following window “Internet Protocol Version 4 (TCP/IPv4)” Properties, go to the radio box that says “Use the following DNS server addresses:”  and enter 8.8.8.8 for the Preferred DNS server and 8.8.4.4 for Alternate DNS server (more reliable than using public ones like Google’s or any ISP’s default; Google’s servers are actually pretty reliable).

Step6: Now again go back to the “General” tab, now click on the “Advanced” button. In the Advanced TCP/IP settings window, under IPv4  Configuration make sure you have selected Use the following IP Address radio box and enter 192.168.1.2  for IP address, 255.255.255.0 for the Subnet mask, and 192.168.1.1 for the Default gateway.

Now click the OK button at bottom of this window to save these changes, a prompt will come up about editing your existing connection that is already active i,e Local Area Connection (unless you have multiple connections)  click Yes or No depending on what has been asked after which you can close all open windows.

Step7: Now Connect your other device to the computer via Ethernet cable and make sure it’s connected properly (ensure you get internet access on both devices) .

Step8: You will now see a LAN connection in the Network and Sharing center named according to the name of your second device just connected i,e if it is named “PC1” then your local area connection’s name should be “PC1 Local Area Connection”. Click that connection and go to Properties again to add “File and Printer Sharing for Microsoft Networks”  to this new connection where we have already added DNS server addresses above.

That’s it! You can now access computers on both sides of the connection by their names.

I hope you find this useful…


Trouble Shooting Networking:

Windows+R and type in “CMD” and click the program called Command Prompt.

In the window that opens up, you will need to type in this exact code into the command prompt: netsh WLAN show drivers. When hit, this command should give you a popup with information about your Wi-Fi card – look for an image of a computer cord with Wi-Fi next to it.

In most cases, if you do not see anything listed under Wireless LAN Adapter or expand Network Adapters, then one of your laptops is either turned off or does not support Wi-Fi at all (if it is old). You can skip this step and continue on with the tutorial but connecting wirelessly may be impossible.

If you do see a Network adapter, follow the steps below to find your wireless card’s driver.

Finding The Correct Driver

In order to connect wirelessly with two laptops, you must have a strong signal between them both in order for this process to work. Therefore, if you do not already have a wireless router/modem in place, check out our How To DIY Connect Two Laptops Wirelessly Using Wi-Fi guide.

To create this network connection we will need the correct drivers installed on each of your laptops – these files are what allow your laptop to communicate with the LAN cable plugged into it. To find the right file type the same command as before ( netsh WLAN show drivers ) into your CMD prompt.

In this new popup, you will need to make sure your wireless card is enabled by looking for a small picture of a computer cord with wireless next to it. If there is no icon present, look for a name beginning ” Intel  (R) Dual Band Wireless-AC 3160 .” Underneath that, find the line marked Physical Adapter. This item tells us what driver we should use when connecting via LAN cable.

If it says “no drivers are installed,” then you will need to install the correct one before continuing on. To do so type in netsh WLAN install name_of_driver at the CMD prompt and hit enter. The correct file can be found in your main Windows folder under c:\windows\

system32\DRIVERS  (where c:\ is your main Windows drive). If you did find the correct driver, skip stepping number 6.

If an incorrect driver was listed after typing in netsh WLAN show drivers, try searching for it using Google or another search engine. If you are unable to find the correct one, there should be a way to manually enter your wireless card information into the CMD prompt if you know what each of its items are. To do this type in netsh WLAN show profiles at the CMD prompt and hit enter.

followed by typing in netsh WLAN connect name_of_network password at the command prompt where “name_of__network” is replaced with the network name (SSID) and password is replaced with the password you use to connect. Once this command has been entered correctly, you should see your wireless card make an attempt to connect with the correct network name. If it does not work immediately, try disabling and re-enabling your Wi-Fi card in Device Manager.

Once it successfully connects, you will see a message appear saying ” The interface is now connected to XXXX Network “.

At this point, both of your laptops should be able to access the internet through each other via LAN Cable. This means that they can also share files by sending them back and forth across the network connection. Just like any form of networking, data transfer speeds may vary depending on how far away from each other your laptops are and what other connections you have running (if any).

Final Words:

For this tutorial, we used Windows 11 however the process is almost identical in all versions of Windows 10 too. To access the CMD prompt, simply do a search for cmd or hold down the windows key at the bottom left of your keyboard while simultaneously pressing R  and then type in cmd.   

The Windows 11 operating system has many new features that make it easier to connect two laptops together. If you’re looking for a way to share files and other resources between the two computers, then this article is perfect for you.

We’ll take a look at how to set up your LAN cable in Windows 11 as well as some of the benefits associated with using a wired connection instead of going wireless. With these steps laid out clearly before you, setting up your own personal network should be easy-peasy! Thanks!

error: Content is protected !! Don\'t Try To Copy Be Carefully