How To Fix Lenovo Laptop Won’t Turn On[Step by step Guide]

Lenovo laptops won’t turn on is a very common problem.  But don’t worry, there are many ways to fix the Lenovo laptop that won’t turn on.  In this article, I will show you the way to fix it step by step.  I hope my guide is very clear and useful for you.

I am going to show you how to fix the Lenovo laptop that won’t turn on. It is a common problem with the machine that it just won’t start up or power on. This can be caused by many different things, but I will go over some of the most common reasons for this happening.

Before we get started: If your PC doesn’t power on at all (no fan movement or LEDs) and there’s no display when you connect an external monitor, skip ahead to If Your Computer Does Not Power On . Otherwise:


Possible General Problems Because Lenovo laptop won’t Turn On?

How To Fix Lenovo Laptop Won’t Turn On Step by step Guide

Lenovo laptops are great computers for multimedia and work. However, users may find problems with powering on sometimes. The laptop does not turn on or the screen stays black during boot. This can be caused by a number of issues from faulty hardware to software problems.

In order to fix the Lenovo laptop that won’t turn on, there are a few things to check.

You can REad This Article too:  How  Much Gold is in a laptop

Here are the common causes of a Lenovo not powering on and some fixes:

1.) Laptop is low on power:

Make sure your laptop is plugged into an outlet and that there is a charge in the battery. If it still won’t turn on, press the power button again to drain any residual power left over.

2.) Check the power cable:

The Lenovo laptop not turning on could be due to a loose or faulty power cable. Try plugging your machine in to another wall socket, preferably one that has a constant supply of electricity (like near a light switch) and see if it works.

3.) Loose battery terminal:

It is also possible that the Lenovo laptop not turning on could be due to a loose battery terminal. Next time you have your machine plugged in, check to see if it is charging. If the charging light doesn’t turn on, this could be the cause of your problem. You can solve this issue by soldering or screwing back into place any loose battery terminals.

4.) Bad power button:

Another cause of Lenovo laptop not turning on is a bad or faulty power button. First, you can try to turn your computer on by pressing the “on/wake” (Fn + F2) key combination and holding it for 10 seconds until the laptop turns on. If this does not work, you will have to replace the power button.

5.) Replace the motherboard:

Lastly, if all else fails, it is possible that the problem lies in a faulty circuit board or bad connection between components on your Lenovo laptop not turning on. In this case, you will need to replace the motherboard

You can read this New Article: Why RAM is Called Volatile Memory


Possible Technical Problems Because Lenovo laptop won’t Turn On?

1)If You Hear One Long Beep:

This usually means that your computer’s memory has become corrupted which may be due to a faulty stick of memory.  Try removing and replacing the faulty stick of memory if possible or borrow a known good one from another computer and try that.

2)If you hear Two Long Beeps:

This usually means that your motherboard is not functioning properly and needs to be reset.  To do this, remove both your battery and power cord for thirty seconds and then plug everything back in and turn on your computer.  Then see if it will boot up normally.

3)If you hear Three Long Beeps:

This indicates a video problem; most likely the video card has failed or is loose.  Remove the main battery as well as any secondary batteries (these are typically located under the keyboard) and unplug your laptop’s power supply. After you’ve done this, press and hold your power button for 10 seconds. Then plug everything back in, install the batteries (if applicable) and turn on your computer.  If it boots up normally then you know that it was simply a loose video card that needed some jostling.

4)If you hear Four Long Beeps:

 This usually means that there’s a problem with the motherboard.  Skip ahead to If Your Computer Does Not Power On to see how we can fix this without having to remove components from your laptop.

5)If you hear Five or more Long Beeps:

This typically means there is a serious hardware failure and needs immediate attention before further damage can occur.  To fix the Lenovo laptop that won’t turn on, please contact the Lenovo service center.

6)If You See a Black Screen:

This can be due to a couple of different problems.  Before we get started, please note that this problem typically happens when your laptop is plugged into a power source. The first thing you should do is remove your battery and unplug your computer from the wall. 

Then press down on the area where your hard drive bay is located (it will feel like a button beneath a catch) and try turning on your laptop again. If you still don’t see anything then it’s time to replace the memory modules in your laptop one by one until you find which module has failed.

To do this, turn off your laptop, un everything from it except for the hard drive, optical drive, and keyboard. Then pop off the memory bay cover on your laptop (this will require a little bit of force) and remove one stick of memory by disconnecting the L-shaped connector that’s near the side closest to your hard drive bay.

 Then reattach it, turn on your computer and see if you still get nothing but a black screen.  If so, try another stick of RAM in exactly the same way until you find out which module has failed. If all three sticks are working then you know that it is either the video card or motherboard.

Don’t Forget to Visit: Why do my HP laptop Keep Freezing


How To Fix All The Problem of Lenovo laptop Won’t Turn on?

Lenovo is a new technology company, they are popular in the mobile phone industry, some people might know Lenovo for its laptop.

I had one Lenovo laptop before but I hate it because, while using that laptop at night then suddenly the power can’t turn on anymore. Besides that, problem the Laptop is also slow while opening files or running some programs, and it can’t be upgraded. So I give up and throw that laptop and buy a new one and now I have a Dell laptop which is better than Lenovo in terms of performance, not just only the performance but also the price.

When it comes to problems on laptops than people mostly think about viruses or malware. But usually, the problem is hardware and there are some steps to fix it:

Lenovo is a new technology company, they are popular in the mobile phone industry, some people might know Lenovo for its laptop.

I had one Lenovo laptop before but I hate it because, while using that laptop at night then suddenly the power can’t turn on anymore. Besides that problem, the Laptop is also slow while opening files or running some programs, and it can’t be upgraded. So I give up and throw that laptop and buy a new one and now I have a Dell laptop which is better than Lenovo in terms of performance, not just only the performance but also the price.

When it comes to problems on laptops than people mostly think about viruses or malware. But usually, the problem is hardware and there are some steps to fix it:

Step 1: Make sure that your laptop battery is running out or not. If the laptop is always plugged in and it still won’t turn on then the problem is not the Laptop battery, some people think that if they have a bigger charger means it can charge their laptop but sometimes you need to check first before you complain about a problem.

Step 2: Clean Up The Memory Stick And Clean The Plugged Port. You don’t know what had happened maybe someone delivers some small packages to your house and they might have dropped something inside which probably makes some dust around there so be cleaned up once in a while especially on your plugged port area because this area usually gets dirty fast. And if it’s too dusty then use a vacuum cleaner to clean it.

Step 3: Update your BIOS drivers. If you are using a Lenovo laptop then update your BIOS driver because most of the problem is usually comes from there, if you don’t know how to update the driver then go follow the steps below.

  • First press F2 when your laptop starts up in order to bring out the system configuration menu,
  • Then go on with Boot tab and choose Boot Option #1 which is UEFI USB HDD or option #5, I can’t remember exactly but just choose one of them so you can find the updated BIOS drivers later on by Google Search.
  • Just wait for few minutes until it finish searching for all the available out there,
  • Then you can choose your Driver that you want to install.
  • After that just click Yes and OK to confirm the installation of the driver, then wait again until it finish installing. And lastly restart your laptop one more time. If by any chance this step doesn’t work then I suggest you go on with Step 4 directly.

Step 4: Remove The Battery. Sometimes we forget that our Laptop is still plugged and the battery is completely drained out, most of the problem is we need to remove the battery or unplug it for a while then plug it again, and then restart your laptop.

Step 5: Check all Hardware Cable Connection And Reset BIOS Settings If the problem is still not solved so this step will surely do some help.

  • First you have to turn off your laptop,
  • Then remove your charger from its socket and press on power button for 30 seconds in order to fully discharge even though there’s no power left on your computer itself,
  • Unplug all of your external hardware devices such as monitor or USB items,
  • Remove your RAM and check if the slot is clean enough, just use a small piece of computer cleaning wipe and then put it back again,
  • Then remove your hard drive or solid state to make sure that everything is open and there’s no obstacle inside.
  • After removing all the hardware devices try to turn on your laptop by pressing power button for 30 seconds while still unplugged from power socket. (If this step doesn’t work then move onto Step 6 directly.

Step 6: Reinstall Windows Operating System or Update Driver If you know how to reset BIOS settings then this step would be easy but if you don’t know what I by reset BIOS settings I mean most of the options just automatically reset itself when you turn off your laptop for 20 seconds, if not then follow these steps below.

  • Reboot your laptop and press the F2 key to bring out the BIOS configuration utility.
  • Then go to Boot tab which is located at top left corner, after that choose UEFI USB HDD as boot option #1 or #5 again depending on the earlier step so you can find updated driver later on by Google Search.
  • Go back to main menu and choose Load Optimal Defaults,
  • And lastly press F10 to save and exit from BIOS settings. If this step doesn’t work as well the previous one

You Can Watch This Video For Further Details and Guidance:


Final Words:

Thanks for Going Through All The Steps. In This Article, We share with you the possible problems that can cause that your Lenovo laptop doesn’t turn on. And on the other side, we share with you the possible solution to each problem. We hope that you get the solution to your problem. If you got it don’t forget to share it with others. Thanks Again.   

Our latest post don’t forget to read: Why laptop makes Rattling Noise

error: Content is protected !! Don\'t Try To Copy Be Carefully